No one likes to think about a soft and slimy swimming pool. When pool season comes around, a good deep clean is in order. One of the easiest and most effective ways to get your swimming pool ready after months of inactivity is to use a robot pool cleaner. In this guide, we’ll show you how to clean a pool for the season with some tools also including a pool vacuum, skimmer, and pool robotic pool cleaner technologies.
Clean and Inspect Pools
Seasonal pool maintenance The first order of maintenance for your pool on a seasonal basis involves clearing away leaves, twigs, or other debris that have collected over time. Scum and deposit on the surface should be removed by a skimmer, while the settled deposit can be handled by a pool vacuum. Make sure to check filters, pumps, and drains for clogs and wear.
If your pool water is cloudy or has algae better to acid wash pool walls or shock the pool a week before cleaning robot as it gets into action.
Put Your Robot Pool Cleaners to the Early Summer Test
After you’ve tackled the general debris, it’s time to let your pool cleaning robot handle the rest. A robotic pool system will brush, filter, and vacuum the floor and walls of your pool. More advanced models, including ones like top-rated swimming pool robot cleaner units, do the heavy lifting for you, with no spot left unturned.
This is where premium offerings such as Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro, and Beatbot AquaSense 2 up the ante. Able to manage small particles as well as large debris, these floor-cleaning robots offer full-coverage cleaning to quickly and easily maintain any type of floor, including those with stubborn grime.
To fight Algae, Stain and Deep Cleaning
If you’ve got a pool that’s showing the first signs of algae, you’re probably wondering: Will a pool robot pick up algae? The vast majority of newer robotic cleaners, including pool vacuum robots such as Maytronics pool cleaner, are designed to be up to the task of light to moderate algae. But if in case it’s bad, you’re going to have to brush it manually and also get your pool vacuum for algae before you start your cleaner.
You should also verify that your particular setup requires additional power. Find out what is a pool booster pump and see if it is something your pool will need.
And then just drag yourself into the water quality quagmire: How to drain an inground pool that has gone bad If your water is ailing, you don’t know what to treat it with, and you don’t know what else to do, here’s a little help with how to drain an inground pool (in a worst-case scenario) without a pump.
Final Steps Before Pool Use
When you’re done cleaning, you should properly test and balance your pool’s pH, chlorine, and calcium hardness. Operate your system to help distribute the water well. Establish a weekly cleaning routine with your robotic pool cleaner to keep your pool clean all the season. Brush the pool surface pool surface with a wall climbing pool cleaner, to avoid the algae building up and damaging the walls and floor.
Conclusion
Opening your pool for the season doesn’t have to be a chore. The good news: With the right tools — and the addition of a robot pool cleaner — you can make sure your pool is clean, balanced and ready to use. So whether you’re skimming, vacuuming, or simply enjoying your Beatbot pool cleaning robot like the AquaSense 2 Pro, preparing for the pool season couldn’t be easier.
