Engineered wooden flooring is a hardwood floor that uses layers of wood to create a seamless, natural-looking surface. Engineered floors are beautiful, durable, and environmentally friendly. This article will answer all of your questions about why you must install engineered wooden flooring to tips on how to keep your floors looking their best.
Let’s get started.
What Is Engineered Wooden flooring?
Engineered wooden flooring refers to the wood that has been combined with glue and other materials. Engineered wood flooring comes in different types, such as floating floors (can be laid without the need for nails or adhesives), while others are fastened down like traditional hardwood floors. Some varieties come with underlayment already attached to them, making installation even easier than before.
How To Install Engineered Wooden Flooring?
Steps to install an engineered wooden flooring:
1. Clean and Prep Floor
Before laying the flooring, it is important to know that you need to expand by leaving gaps between the wall and woodwork. This means there needs to be some space around doorways, cupboards, etc. You also want to ensure your floor is clean of any dirt or debris before installing engineered wooden floors.
It’s recommended that you sweep up any dust off the floor prior to installation, but do not use a vacuum cleaner on hardwood surfaces as this can damage them with its rough bristles.
2. Roll-out Tar Sheets
Tar sheets are made up of wood fiber or sawdust that is pressed into a sheet. They have the same material composition as plywood, but in this case, it is not layered with thin veneers. Tar products are versatile because they can be used both indoors and outdoors due to their ability to repel water from exposure to outside elements such as rainwater, snowfall, etc.
In addition, unlike conventional hardwood flooring materials like bamboo floors or engineered hardwood floors, there is no need for any finishing product at all.
3. Prepare the Planks to Assemble
If you are using planks that already come in a smaller size (for example, the plank width is 94-97 cm), proceed to the next step. However, if your engineered wood floor comes in larger sizes, say 120x600cm or so, measure and cut each plank according to their measurements before assembling them. Use either an electric saw for this task or ask somebody who has experience handling tools like these.
4. Install Flooring
Once you have the right materials, installing a new wooden floor is not difficult. Use a hammer and chisel to remove any extra pieces of wood that are sticking out from under your baseboards. Once everything has been done in preparation for the installation process, begin by applying adhesive directly onto the substrate and then setting down each plank into place, overlapping about ½ inch at the seams.
5. Finish Flooring with a Baseboard and a Set of Thresholds
Measure the width of your room and subtract six inches from each side. This is how wide you need to cut out a baseboard to flush with the wall on both sides. If there’s a difference in height or texture between the two walls, use quarter-round molding instead. Cut down your threshold if necessary for an easy fit under doorways.
Advantages Of Installing Engineered Wooden Flooring
The primary reason for the quick popularity of engineered wood flooring is that it requires little or no maintenance. Unlike traditional hardwood floors, they don’t require much effort to clean and are very easy to take care of. It’s almost like taking care of a laminate floor – you can use a regular mop, dust-buster, plus vacuum cleaner without worrying too much about scratches or dirt accumulation over time.
Engineered wooden flooring is very strong and durable. It has several surfaces that can withstand scratches, dents, stains, etc. This type of flooring comes with the best warranty in comparison to any other type of floor.
Great Property Value
Many homebuyers are concerned about the value of their property. The type of flooring you choose for your new apartment will influence how much money you can sell your house for if ever it comes to that point. If you want something affordable, wooden floors might be what fits into your budget best. Wooden Flooring is also often chosen due to its aesthetic appeal and durability, which ensures that buyers who prefer not to renovate won’t have any issues with this either.
Engineered wooden flooring has a great aesthetic appeal because it looks like natural wood. Many people love the idea of living in an eco-friendly house, and engineered wooden floors are perfect for them as they do not use any chemicals or stains to give that nice-looking shine on their surface, which means you can live with nature.
Engineered wooden flooring comes in a wide range of options. Engineered oak flooring is one of the cheapest options. You can find this product for around $25 per square foot, making it a good choice for those on a budget. This flooring is also available in different finishes such as hand-scraped, distressed, and wire brushed. This makes it easier for you to choose the right product that will suit your needs and budget.
How to Clean Engineered Wooden Floors?
Sweep the area with a dry broom or vacuum cleaner. Use a damp mop for cleaning moisture and use clean water for rinsing out & mopping purposes. Wash away all dirt, dust particles, etc. using warm soapy solution (dishwashing detergent) by applying it on wet cloth/mop; then wipe off thoroughly with a clean sponge/cloth after a few minutes of application time to avoid any slippery surface issues while walking over treated wooden floors in future once dried properly.
You should never leave residue soap behind as it may cause damage, eventually creating other problems like peeling off the paint layer or even finish could get peeled off if left long enough times.
The Bottom Line
Engineered wood floors are a more affordable and versatile option than solid hardwood. It’s durable, comes in many different styles and finishes, and has an easy installation process that homeowners themselves can do.