Home Maintenance Tips – Watch Out For Plumbing System Vulnerabilities That Can Lead To Water Leakage

Water is life, but it can be very harmful at times if you ignore water leakages at home that can wreak havoc. It is not that all leakages are dreadful, but you never know when it might cause so much damage that you may have to pay a heavy price for ignoring it. Regardless of the extent of the leak, it is essential to spot the underlying cause by calling a professional plumber. Click here to get in touch with a plumbing agency.

Early leak detection is a rarity unless it is big enough to draw attention. It pays to stay alert by knowing the vulnerabilities of the household that can prevent leakage.

Here are some of the places in the household that you must monitor closely to know if there is any water leakage happening.

The laundry room

Since the laundry room handles a high volume of water, which is only second to the bathroom, you must keep a close watch on the washing machine that might have ruptured hoses for hot and cold-water supply. Inspect the hoses for signs of cracks and abrasion. Also, check for watermarks on the wall behind the washer.

Water heaters

Water heaters do not leak usually, but as it grows old, the tank begins to corrode and rust and can start leaking. When the tank becomes weak, it can leak slowly, or there might be a sudden burst. Regular preventive maintenance of water heaters should include periodical removal of sediment from the tank and checking the anode rod, which delays corrosion and prevents leakage. If you see a puddle under the tank or hear a hissing sound on removing the drainpipe, then these are signs of water leakage.

The Toilets

The pipeline supplying water to the toilet and the water tank are most prone to leakage from the flanges and wax ring. Leaking pipes behind the walls can damage the drywall by moistening it. When the moisture appears through the surface, it creates wet spots and watermarks. Regular inspection of the toilet pipelines, including looking for signs of mildew and puddle should help to detect leakage.

Sump/sewer pump

After heavy rain and storm, you must inspect the sewer system which might get blocked due to debris collection that causes backflow and floods the basement. Periodical inspection of the sewer system will help to keep it clean and avoid leakages.

Sinks and showers

Detecting leaks in bathrooms is quite challenging because all pipelines remain concealed in the walls behind the tiles. Worn out caulking or damage to the pipelines can cause water leakage. If you observe low water pressure in the sinks and showers, it is a sign of leakage in the pipeline. Warped tiles mean that the damage has set in deep.

High water pressure

Water supply at optimal pressure is necessary to prevent too much stress in the pipeline and reduce the chances of damage. If the water pressure exceeds the range of 40 to 60 psi, it will damage pipes, appliances and fixtures and cause water to leak.